Ot_Cap_Normo_1,6

Logo_OT_CAP

Threaded Spheres – OT Cap Normo M1.6

This new line consists of a universal threaded sheath made of titanium and
Ot Cap Normo or Micro or Ot Equator Profile ball attachments:
this system can be used for machining with Cad Cam method and with the traditional lost wax method.

The threaded sheath can be glued and used indiscriminately for all three types of connections.
The couplings have a thread with a 1.6 mm diameter pitch.
With the use of the systematic Cad/Cam or with the handmade one, the result is always the same:
maximum precision and interchangeability

product info

laboratory

product specification

Videos and Documents

Product info

Ref. 139KSFN

KIT SINGLE THREADED SPHERE NORMAL SIZE + TiN

Kit contains:

• 2 TITANIUM NORMAL SINGLE THREADED SPHERE
(HEX mm. 1.3 THREAD mm. 1.6)
• 2 TITANIUM BOND - IN THREAdED SLEEVE
• 2 S/STEEL SPACER for the THREADED SLEEVE (Normal sphere)

Ref. 192ACN

KIT ASSORTIMENTO CAPPETTE OT CAP NORMO SIZE

confezione contenente:

• 1 STAINLESS STEEL HOUSING
• 1 PROCESSING CAP
• 1 PROTECTIVE DISK
• 4 RETENTIVE CAPS (1 GREEN, 1 YELLOW, 1 PINK, 1 CLEAR)

Spare parts

Ref. 239SFN

• 1 SINGLE THREADED SPHERE NORMAL SIZE + TiN
FOR THREADED SLEEVE HEX mm. 1.3 THREAD mm. 1.6

Ref. 239GSF

• 1 TITANIUM BOND-IN THREADED SLEEVE
FOR NORMAL AND MICRO - mm. 1.6

Ref. 239SSN

• 1 STAINLESS STEEL SPACER for THREADED SLEEVE (Normal sphere)

Ref. 048CAN

• 6 SILVER CAPS NORMAL SIZE (EXTRA-RESILIENT)
(ELASTIC AND GUMMY) - 350 g

Ref. 048CON

• 6 GOLD CAPS NORMAL SIZE (EXTRA-RESILIENT)
(SLIGHTLY ELASTIC) - 500g

Ref. 049PCN

• 6 GREEN CAPS NORMAL SIZE
(VERY ELASTIC RETENTION) -350g

Ref. 060CRN AY

• CAPPETTE NORMO - GIALLE
(EXTRA SOFT RETENTION) - 500g

Ref. 040CRN SN

• 6 YELLOW CAPS NORMAL SIZE
(EXTRA SOFT RETENTION) - 900g

Ref. 040CRN

• 6 CLEAR CAPS NORMAL SIZE
(STANDARD RETENTION) - 1300g

Ref. 040TCN

• 2 TITAN CAPS NORMAL SIZE

Ref. 043CLN

• 2 BLACK CAPS NORMAL SIZE
(FOR LABORATORY USE ONLY)

Ref. 041CAN

• 2 STAINLESS STEEL HOUSINGS NORMAL SIZE

Ref. 041CTN

• 2 TITANIUM HOUSINGS NORMAL SIZE

Tools

Ref. 74AC01

• 1 KEY FOR PARALLELOMETER NORMAL SIZE

Ref. 760CBR

• 1 HEX DRIVER FOR THREADED SPHERE NORMAL
HEX 1.3mm

Ref. 485IC

• 1 EXTRACTOR/INSERTER TOOL FOR CAPS-NORMAL AND MICRO SIZES
(FOR THE INSERTION OF THE CAPS INSIDE THE METAL HOUSINGS)

Laboratory

Step by step threaded sleeve bonding procedure

Once the bar has been connected with wax, create an area where the attachment spacer will be placed .

Apply separator to the base of the attachment spacer and postion using the parallelometer key .

With the attachment spacer in position, complete the wax-up design .

Carefully remove the attachment spacers and proceed with the normal casting procedur.

Screw the threaded attachment of choice (micro Ball shown) into the threaded sleeve .

Place the assembled attachment into the parallelometer key. Use a self curing metal to metal bonding composite on the sleeve and in the cylinder.

After the composite is cured, remove any excess material.

Unscrew the attachment to verify if the threaded sleeve is securely bonded in plac.

The finished bar complete with attachments.

3 ATTACHMENT OPTIONS

Product specification

Videos and Documents

product info

laboratory

product specification

Videos and Documents